An essential piece of off road underbody protection for the Discovery 3&4.

This guard is designed to protect the air suspension compressor unit. The air compressor sits low on the car and is therefore vulnerable, but this thick, reinforced steel guard is capable of taking the full weight of the vehicle.

It's easily fitted with no drilling required and can be quickly removed with just two bolts and a hook to gain access to compressor if needed.

It's been designed with an angled skid plate at front to allow vehicle to easily ride up and over objects and deflect debris. The bottom plate sits at a slight angle, with drain holes at the back so water is not held in, also allowing for easy washing out.

A machined pin locates into existing hole in chassis to add more strength for frontal impacts. We cover the standard jacking point up with our guard but we've replicated the original hole so the guard can act as a suitable jacking point. 

It can be fitted with Rock Sliders or on it’s own.

Importantly, it does not rigidly tie the monocoque body to the chassis, it floats on the chassis rails.